Headlamp Switch: Service and Repair

Headlamp Switch









Removal and Installation

1. Remove the steering column opening trim panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the screw and the headlamp switch bezel.
- Disconnect the electrical connectors.

3. NOTE: The 3 retaining tabs on the headlamp switch are located at approximately the 3, 6 and 11 o'clock positions when viewed from the front.

Release the 3 tabs and remove the headlamp switch from the bezel.

4. To install, reverse the removal procedure.