FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Mustang V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lash Adjuster

Hydraulic Lash Adjuster




Hydraulic Lash Adjuster





Removal and Installation

1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower Camshaft Roller Follower.

2. NOTE: Mark the position of the hydraulic lash adjusters so they can be installed in their original positions.

Remove the hydraulic lash adjusters.

3. NOTE: The hydraulic lash adjusters must be installed in their original positions.

NOTE: Lubricate the hydraulic lash adjusters with clean engine oil.

To install, reverse the removal procedure.

pro multis Credits:Operation CHARM About Operation CHARM