Camshaft Roller Follower

Camshaft Roller Follower









Removal and Installation

1. Remove the fuel rail.

2. Remove the LH and RH valve covers. For additional information, refer to Valve Cover - RH Valve Cover - RH and Valve Cover - LH Valve Cover - LH.

3. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.





4. NOTE: Mark the position of the camshaft roller followers so they can be installed in their original positions.

Using the Valve Spring Compressor, remove the camshaft roller followers.





5. NOTE: The camshaft roller followers must be installed in their original positions.

NOTE: Lubricate the camshaft roller followers with clean engine oil.

To install, reverse the removal procedure.