Test L: The Hazard Lamps Are Inoperative/Always On

PINPOINT TEST L: THE HAZARD LAMPS ARE INOPERATIVE/ALWAYS ON

L1-L2:

L3-L5:

Normal Operation
The smart junction box (SJB) sends a voltage reference signal to the hazard flasher switch through circuit 1689 (RD/WH). When the hazard flasher switch is pressed, the signal is routed to ground through circuit 1205 (BK).

DTC B2071 - sets when the SJB detects a short to ground from the hazard lamp switch input circuit.

Possible Causes
- Circuit 1205 (BK) open
- Circuit 1689 (RD/WH) open or short to ground
- Hazard flasher switch
- SJB