Test G: The Autolamps Are on Continuously

PINPOINT TEST G: THE AUTOLAMPS ARE ON CONTINUOUSLY

G1-G2:

G2-G6:

G6-G8:

G8-G10:

Normal Operation
When the headlamp switch is placed in the autolamp position, a voltage signal is sent to the smart junction box (SJB) through circuit 220 (VT/OG). The SJB then monitors the light sensor by sending a reference voltage signal through circuit 218 (WH/VT). The light sensor is grounded through circuit 651 (BK/YE).

Possible Causes
- Circuit 218 (WH/VT) open or short to voltage
- Circuit 220 (VT/OG) short to voltage
- Circuit 651 (BK/YE) open
- Headlamp switch
- Light sensor
- SJB