Sunroof / Moonroof: Adjustments

ROOF OPENING PANEL ALIGNMENT

1. Cycle the roof opening panel glass through the fully open to the fully closed position.







2. Loosen the LH and RH roof opening panel glass screws.
- Loosen the 2 front and 2 center screws to adjust the front.
- Loosen the 2 rear and 2 center screws to adjust the rear.







3. Adjust the roof opening panel glass to specification.
4. Tighten the roof opening panel glass screws.
- Tighten to 3 Nm (27 lb-in).