Diagnostic Routine F

Diagnostic Routine F

Diagnostic Overview

The Flash-To-Pass Function Is Inoperative

Refer to Wiring Diagram Set 85 for schematic and connector information Electrical Diagrams.

Normal Operation and Fault Conditions

REFER to Flash-To-Pass .

Visual Inspection and Diagnostic Pre-checks

- Inspect the multifunction switch for damage.

Pinpoint Test

1. VERIFY THE HIGH BEAM HEADLAMP OPERATION

1. Ignition ON.

2. Place the headlamp switch in the headlamps on position.

3. Place the multifunction switch in the high beam position while observing the headlamps.

Do the high beam headlamps illuminate?