Handles, Locks, Latches and Entry Systems - without Intelligent Access (IA)

Keyless Entry Keypad Code Programming

Program a Personal Keyless Entry Keypad Code

NOTE: The system allows 4 personal codes to be programmed using the keyless entry keypad.

NOTE: Multiple personal codes can be programmed in 1 step. When programming multiple codes in 1 step, each code must be programmed by entering each button within 5 seconds of each other. If 5 seconds elapse between any button press, programming mode is exited.

NOTE: If only a single personal code is desired or unable to program multiple codes in one step, each personal code can be programmed individually by repeating Steps 1-5 for each code desired.

1. Enter the factory set 5-digit keyless entry keypad code.

2. Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode.

3. Enter the new personal 5-digit keyless entry keypad code. Each number must be entered within 5 seconds of each other.

4. After entering the new personal code, press a 6th button to program each new code.

1. Pressing 1/2 stores the first personal code.

2. Pressing 3/4 stores the second personal code.

3. Pressing 5/6, 7/8 or 9/0 stores the third personal code.

5. The door locks lock and unlock to confirm the new code is programmed.

Erasing the Personal Keyless Entry Keypad Codes

1. Enter the factory set 5-digit keyless entry keypad code.

2. Within 5 seconds, press the 1/2 button on the keypad and release.

3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.

4. All personal codes are now erased and only the factory set 5-digit code works.