Parking Brake Cable - Intermediate

Parking Brake Cable - Intermediate

NOTE: The equalizer is integral to the intermediate cable.











Removal and Installation

1. Release the tension on the parking brake cable. For additional information, refer to Parking Brake Cable Tension Release Procedures.

2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

3. Disconnect the intermediate parking brake cable from the front cable at the cable connector clip.

4. Disconnect the LH and RH rear parking brake cables from the intermediate parking brake cable at the equalizer.

5. Remove the intermediate parking brake cable.

6. To install, reverse the removal procedure.