Shift Cable: Adjustments

Selector Lever Cable Adjustment





Special Tool(s)





1. Remove the upper steering column shroud.





2. Remove the lower steering column shroud.
1 Remove the screws.
2 Remove the lower steering column shroud.





3. Position a 0.6 mm (0.023 inch) feeler gauge between the gearshift lever selector and the gearshift lever detent.
4. Place the gearshift lever in the DRIVE position and hang a 1.4 kg (3 lb) weight from the gearshift lever.





5. Loosen the gearshift cable adjuster to adjust the cable then tighten.
6. Remove the weight from the gearshift lever.
7. Place the gearshift lever in the PARK position and remove the feeler gauge.





8. Install the lower steering column shroud.
1 Position the lower steering column shroud.
2 Install the screws.





9. Install the upper steering column shroud.