O: C1279, C1280, C1281, C1282, C2769, C2770, C2777, C2778- Sensor Cluster Fault

PINPOINT TEST O: DTC C1279, C1280, C1281, C1282, C2769, C2770, C2777, C2778- SENSOR CLUSTER FAULT

Test O1:

Test O1-O3:

Test O3-05:

Test O5-O6:

Test O6-08:

Test O8-O9:

Test O9 Continued:

CAUTION: Use the flex probe kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.

NOTE: The yaw rate sensor, lateral accelerometer, and longitudinal accelerometer (4WD) are integral to the sensor cluster.

NOTE: Make sure the vehicle is not on a hoist and is sitting on level ground before performing stability assist module calibration.

NOTE: The vehicle must be on level ground, not on a hoist and at a complete standstill. Any vehicle movement will result in false values for this test.