A L L Diagnostic Trouble Codes ( DTC )
Testing and Inspection- Diagnostic Trouble Code Descriptions
- Manufacturer Code Charts
- Code to Test Chart
- Driveability (DR) Tests
- Transmission Control System
- Diagnostic Test Procedures
- 1A 4A/T Diagnosis and DRBII Communication Tests
- 2A Checking the System For Diagnostic Trouble Codes
- 3A DRBII Communication Test
- 4A Checking Throttle Position Sensor
- 6A Checking Fluid Temperature Sensor-Fault Code 15
- 7A Checking Fluid Temperature Sensor-Fault Code 16
- 8A Checking Fluid Temperature Sensor-Fault Code 17
- 9A Checking Kickdown Servo Switch
- 10A Checking Ignition Coil Pulse
- 11A Checking Acceleration Switch
- 12A Checking Pulse Generator B
- 13A Checking Pulse Generator A
- 14A Checking Shift Control Solenoid Valve A (SCSV)
- 15A Checking Shift Control Solenoid Valve B (SCSV)
- 16A Checking Pressure Control Solenoid Valve (PCSV)
- 17A Checking Damper Clutch Control Solenoid Valve
- 18A Checking 1ST Gear Synchronization-Fail Safe Item
- 19A Checking 2ND Gear Synchronization-Fail Safe Item
- 20A Checking 3RD Gear Synchronization-Fail Safe Item
- 21A Checking 4TH Gear Synchronization-Fail Safe Item
- 22A Checking Torque Reduction Signal Lines
- 23A Checking Open Torque Reduction Request Signal Lines
- 24A Check Shorted Torque Reduction Execution Signal Lines
- 25A Checking For Shift Points Not Synchronize
- 26A Testing For Intermittent Fault Codes
- Helpful Information (Help 1-8)
- Diagnostic Test Procedures
- Verification Tests