Component Tests and General Diagnostics

1. Shift selector lever to each range and check that lever moves smoothly and is controlled. Check that position indicator is correct.

2. Check to be sure the selector lever can be shifted to each position (by button operation as shown in the illustration).

3.Start the engine and check if the vehicle moves forward when the selector lever is shifted from N to D and moves backward when shifted to R.

4.When the shift lever malfunctions, adjust control cable and selector lever sleeve. Check for worn shift lever assembly sliding parts.

5. Ensure that the vehicle will not start in Reverse or Drive.

CAUTION: Set Parking and Service brakes firmly before this test is performed.