Cylinder Head Cover(s) - Removal

REMOVAL





1. Disconnect the negative battery cable (1).
2. Remove the engine cover.





3. Disconnect the ignition coil electrical connectors (1).
4. Remove the ignition coil retaining bolts (3) and remove the ignition coils (2).





5. Using the sequence shown, remove the cylinder head cover retaining bolts.

CAUTION: Do not use harsh cleaners to clean the cylinder head covers. Severe damage to covers may occur.





6. Remove the cylinder head cover (1).
7. Clean the sealing surface of the cylinder head (2).

NOTE: The cylinder head cover gasket may be used again, provided no cuts, tears, or deformation have occurred.