Clutch Disc - Removal

REMOVAL

DIESEL










WARNING: Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris

1. Remove transaxle assembly T355 Manual Transmission - Removal.
2. Mark position of pressure plate (3) on flywheel (1) with paint or scribe for assembly reference.
3. Loosen and remove six pressure plate-to-flywheel bolts. Remove pressure plate (3) and clutch disc (2).










4. Remove eight flywheel-to-crankshaft bolts and remove flywheel assembly (1)(Figure 2).

GAS





WARNING: Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris

1. Remove transaxle assembly T355 Manual Transmission - Removal.
2. Remove the modular clutch assembly (1).