Center Console - Installation

INSTALLATION

CENTER





1. Install the front shifter housing, if necessary. Refer to FRONT SHIFTER HOUSING.
2. Pull parking brake (5) into upright position.
3. Insert center console over parking brake.
4. Connect console wiring connector (2) to instrument panel connector (4).
5. Firmly seat the front of the center console retainers (1) until they engage to the front floor bracket (6).
6. Insert and fasten two rear screws (1) into rear floor bracket (3).

FRONT SHIFTER HOUSING





1. Install the front console shifter housing (2) and install the two rear screws (1).





2. Connect the electrical connectors (2).
3. Position the accessory switch bank assembly (1) back and seat the retaining clips fully.





4. Install the shift bezel (1) onto the console (2). Shifter Bezel - Installation
5. Install the center console, refer to CENTER.