Floor Distribution Duct - Installation

INSTALLATION

RIGHT FRONT FLOOR DUCT






NOTE: LHD model shown. RHD model similar.

1. Connect the right front floor duct (1) to the right side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the instrument panel Instrument Panel - Installation.

LEFT FRONT FLOOR DUCT

NOTE: Illustration shown with instrument panel removed for clarity.






NOTE: LHD model shown. RHD model similar.

1. Connect the left front floor duct (1) to the left side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the screw that secures the left front floor duct to the left side of the HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
3. On LHD models, install the steering column opening cover Steering Column Opening Cover - Installation.
4. On RHD models, install the instrument panel cover Instrument Panel Cover - Installation.

REAR FLOOR DISTRIBUTION DUCTS





1. Connect the left rear floor distribution duct (1) and the right rear floor distribution duct (2) as required to the HVAC housing (3). Make sure the ducts are fully engaged to the housing.
2. Install the rear seat floor ducts (refer to REAR SEAT FLOOR DUCTS).
3. Install the instrument panel Instrument Panel - Installation.

REAR SEAT FLOOR DUCTS

NOTE: Right side rear floor duct shown. Left side duct similar.






NOTE: LHD model shown. RHD model similar.

1. Connect the rear seat floor duct (2) to the rear floor distribution duct (3). Make sure the ducts are fully engaged to each other.
2. Engage the retainer that secures the rear seat floor duct to the floor support (4) and install the retaining screw (1). Tighten the screw to 2.2 Nm (20 in. lbs.).
3. Reinstall the carpet Carpet - Installation.
4. Install the front seat to the side of the vehicle being serviced Seat - Installation.
5. Install the center floor console Center Console - Installation.