Driver Airbag - Removal

REMOVAL





1. Open hood.
2. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.

3. From behind the steering wheel (2), gently pry off the driver airbag bolt covers.
4. Remove the two driver airbag attaching bolts (1).
5. Pull airbag rearward and disconnect the two airbag squib connectors (3).
6. Remove airbag (4) from vehicle.

WARNING: When replacing a deployed driver airbag, the clockspring MUST also be replaced Removal.