Instrument Cluster Hood Replacement

REMOVAL
1. Remove instrument panel left end cap. Instrument Panel End Cap
2. Tilt steering column down to its lowest position,

Center Bezel:

3. Remove instrument panel center bezel by disengaging the four clips. Instrument Panel Center Bezel
4. Remove four attaching screws under the center bezel.
5. Remove screw at left end of panel.
6. Pull hood straight back to disengage the eight clips.

Instrument Cluster Hood:

7. Remove instrument cluster hood.

INSTALLATION
For installation, reverse the above procedures. Keep the forward edge of the hood down on the instrument panel while sliding the hood forward to engage the retaining clips.