Console: Service and Repair

Center Console Bezel:

CENTER CONSOLE BEZEL REMOVAL
1. Place gear selector in neutral.
2. Loosen set screw holding gear shift knob to gear shift.
3. Pull gear shift knob from gear shift.
4. Remove ash receiver.
5. Remove screw holding bezel to center console.
6. Disengage clips holding rear of bezel to center console.
7. Separate bezel from vehicle.

INSTALLATION
1. Place bezel in position on vehicle.
2. Engage clips to hold rear of bezel to center console.
3. Install screw to hold bezel to center console.
4. Install ash receiver.
5. Push gear shift knob onto gear shift.
6. Tighten set screw to hold gear shift knob to gear shift.

Center Console:

CENTER CONSOLE REMOVAL
1. Remove center console bezel.
2. Remove screw holding forward crossmember to floor mounting bracket.
3. Remove screws holding bottom of glove compartment to rear mounting bracket.
4. Separate center console from vehicle.

INSTALLATION
1. Place center console in position on vehicle.
2. Install screws to hold bottom of glove compartment to rear mounting bracket.
3. Install screw to hold forward crossmember to floor mounting bracket.
4. Install center console bezel.