Throttle Body Cleaning

1. Under normal or severe operating conditions, it is possible for the throttle body to build deposits in the air flow area near the PCV inlet, and/or near the Automatic Idle Speed (AIS) inlet. These deposits can cause driveability problems that may or may not appear as a fault code in diagnosis.
2. Visually inspect the throttle body air flow area and if deposits are present remove the throttle body. Throttle Body Replacement
3. Carefully clean any deposits from the throttle body air flow area, and insure that the intake plenum is also clean.
NOTE: Do not use harsh abrasives or tank solvent washing to clean the throttle body.
4. Install the throttle body and intake plenum if it was removed, and perform the throttle body minimum air flow test.