Reservoir, Power Steering Pump - Installation

INSTALLATION





1. Install the reservoir bracket to the pump housing (if equipped). Do not reuse the o-rings (install new o-rings). Tighten bolts to 7 Nm (62 in. lbs.).

NOTE: Ensure the reservoir (1) is fully seated onto the pump (3).

2. Install the reservoir (1) to the bracket/pump body (3).
3. Install the reservoir mounting bolts (2). Tighten bolts to 13 Nm (120 in. lbs.).
4. Install the power steering pump (3)Power Steering Pump - Installation.
5. Install the serpentine drive belt, Serpentine Accessory Drive Belt - Installation.
6. Fill the power steering pump, Procedures