Floor Console Duct - Installation

INSTALLATION






NOTE: Illustration shown with center front seat removed for clarity.

1. If removed, install the rear duct (2) onto the rear outlet (4). Make sure the duct is fully engaged to the outlet.
2. Install the three push-pin retainers (1) that secure the rear duct to the front seat support (3) and install the front seat Front Seat - Installation.






NOTE: Illustration shown with seat cushions removed for clarity.

NOTE: Automatic transmission models shown. Manual transmission model similar.

3. Install the floor console duct (1) onto the rear floor distribution duct (5). Make sure the ducts are fully engaged to each other.
4. Engage the floor console duct onto the stud (4).
5. Slide the rear duct adapter (3) forward and install the floor console duct onto the rear duct (2). Make sure the ducts are fully engaged to each other.
6. Install the floor console Floor Console - Installation.