Exhaust Gas Recirculation (EGR) Tube - Removal

CAB/CHASSIS MODELS





1. Disconnect both negative battery cables.
2. Remove four bolts (1) and EGR crossover tube cover (2).





3. Disconnect EGR Temperature Sensor harness connector (4).
4. Loosen and remove two clamps (1) and (3) at ends of EGR Crossover Tube.
5. Remove "P" clamp mounting bolt (5) at center of EGR Crossover Tube.
6. Remove EGR Crossover Tube (2).
7. Remove and discard gaskets (doughnuts) at each end of tube.