Headliner - Installation

INSTALLATION






NOTE: Headliner for Quad Cab model shown. Regular cab similar.

1. Position the headliner (9) into the vehicle through the passenger door opening.
2. Connect the headliner wire harness connector (8) to the center high mounted stop lamp.
3. Raise the rear of the headliner upward and install the two coat hooks (7) Coat Hook - Installation.
4. Raise the front of the headliner upward and install the sun visor supports (5) Visor Support - Installation.
5. Install the sun visors (4) Visor - Installation.
6. Install the dome lamp (6) Dome Lamp - Installation.
7. Install the overhead console Overhead Console - Installation.
8. Connect the headliner wire harness connector (3) to the inside rear view mirror
9. Connect the headliner wire harness (2) to the wire harness connector (1) located at the left A-pillar.
10. On Quad Cab models, install the upper C-pillar trim panel C-Pillar Trim Panel - Installation.
11. Install the upper B-pillar trim panels B-Pillar Trim Panel - Installation.
12. Install the upper A-pillar trim panels. A-Pillar Trim Panel - Installation.
13. On Mega Cab models, install the front seats, Seat - Installation.