Vibration Damper - Installation

INSTALLATION

Special Tools:










1. Position damper onto crankshaft.
2. Using (10387), install the threaded rod (1) onto the crankshaft (2).
3. Tighten the threaded rod (4) until it is seated to the face (3) of the crankshaft.
4. Install the press washer, bearing, washer, and the press nut onto the threaded rod.
5. Press the vibration damper on till seated.





6. Install crankshaft damper bolt.
7. Position the (10386)(2), onto the vibration damper (3).
8. Tighten bolt to 176 Nm (129 ft. lbs.).





9. Install cooling fan Cooling Fan - Installation.





10. Install accessory drive belt (1). Serpentine Accessory Drive Belt - Installation.
11. Refill cooling system Service and Repair.
12. Connect negative cable to battery.