Power Steering Pump - Removal

NON SRT





1. Disconnect and isolate battery negative cable (2) from battery post.
2. Raise and support vehicle Maintenance.
3. Remove right front wheel mounting nuts, then tire and wheel assembly.
4. Remove right front wheelhouse splash shield Splash Shield - Removal





5. Siphon power steering fluid from pump reservoir (4).
6. Disconnect electrical connectors (1) from Electro Hydraulic Power Steering (EHPS) pump body (3).
7. Remove power steering pressure line bolt (2) and position the pressure line away from the EHPS pump.





8. Remove EHPS pump bracket (1) mounting bolts (2).





9. Remove EHPS pump bracket retaining nut (4) and remove the EHPS pump (1) from the vehicle.