Removal

REMOVAL

NOTE: The following procedure may be used to remove shoes on either side of the vehicle.

1. Raise and support vehicle. Maintenance
2. Access and remove rear hub and bearing. Rear Hub And Bearing - Removal










3. Completely back off parking brake shoe adjustment (8).
4. Remove parking brake shoe adjuster spring (3).
5. Remove shoe adjuster (8).
6. Remove upper brake shoe hold-down clip and pin (7).
7. Remove upper shoe (6) from return spring (4) and shoe actuator lever (1).
8. Remove return spring (4) from lower shoe (6).










9. Remove shoe actuator lever (1) from end of cable (2).










10. Remove lower brake shoe hold-down clip and pin (7).
11. Remove lower shoe (6).
12. Inspect springs, adjuster, lever and aluminum shoe anchor pin for wear or damage. Replace as necessary.