Cowl Panel Cover - Installation

INSTALLATION





1. Position the cowl top panel (1) into the engine compartment.
2. Engage the integral retaining clips that secure the cowl top panel to the dash panel (5).
3. Install the six push-pins (4) that secure the cowl top panel to the strut tower support (6).
4. Engage the 1/4-turn fasteners (3) that secure cowl top panel to the dash panel.
5. Install the push-pin (2) that secures each end of the cowl top panel to each front fender (7).
6. Install the windshield wiper arms Wiper Arm - Installation.





7. Position the front cowl top panel (1) to the right rear corner of the engine compartment.
8. Install the two push-pins (2) that secure the front cowl top panel.