Universal Transmitter - Description

DESCRIPTION





The HomeLink(R) transceiver for this vehicle is located within the overhead console (1). The only visible component of the universal transmitter are the three transmitter push buttons (3) at the front of the overhead console. The buttons are marked with one, two or three illuminated dots, respectively, for identification of each channel.

Each of the three transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security systems or just about any other device that can be equipped with a radio receiver in the 286 to 399 Megahertz (MHz) frequency range for remote operation. The transmitter is capable of operating systems using either rolling code or non-rolling code technology. The system will not transmit operating signals if the Vehicle Theft Security System is armed.

The HomeLink(R) transceiver cannot be repaired, and is only available for service with the overhead console. If any part of the component is inoperative or damaged, the complete overhead console assembly must be replaced, Overhead Console - Removal.