Instrument Cluster Bezel - Removal

REMOVAL

Special Tools:











NOTE: The gap hider on the upper shroud is attached to the instrument cluster (1) by four retaining tabs along the top and two along the sides (one each side). These tabs can be easily released by hand but is recommended to remove/install as an assembly. Do not use a tool that could damage the gap hider.

1. Remove the lower steering column shroud, Steering Column Shroud - Removal.
2. Pull rearward to disengage the retaining clips and remove the instrument cluster trim bezel/upper steering column shroud (1).





3. On Avenger models, use a trim stick or equivalent and pull rearward to disengage the retaining clips and remove the instrument cluster hood (1).