Front Bumper Fascia - Installation

INSTALLATION





1. Raise vehicle.
2. Raise fascia up to vehicle and connect fog lamp connectors if equipped.
3. Connect the side marker lamp electrical connectors.
4. Slide fascia into push pins ensuring proper seat.
5. Install closeout panel fasteners and push pins Front Lower Fascia Closeout - Installation.





6. Install right and left splash shield fasteners and push pins.
7. Lower vehicle.





8. Place grille onto fascia.
9. Install grille push pins (2) and fascia fasteners (1) Grille - Installation.





10. Install air box inlet push pin (4) and fastener (2).