Water Leak Test

WATER LEAK TEST

DEALERSHIP WATER TEST PARAMETER

Garden hose with city water pressure at approximately 45 psi and 13-17 gpm. Hose not recommended to be closer than 12 inches from the vehicle surface. When not possible to be 12 inches from the surface, keep the hose against the body above the seal and let the water flow naturally down to the sealing surface.

WATER LEAK STRATEGY




Example taping of convertible top.

CAUTION: Avoid high-pressure washes, as they can damage the top material. Also, increased water pressure may force water past the weatherstrips.

1. Identify where the water is entering the vehicle and what environmental conditions/driving conditions they occur at.
2. Dry off all areas and tape (1) off the vehicle, as shown, except where the water is entering (2) and retest to confirm entry.
3. Based on where the water is entering and confirmed, diagnose the problem. Water Leaks.
4. Retest after adjustment or part replacement. If not dry go to 2. If dry continue to 5.
5. Remove all tape from the convertible top and test for leaks. Repeat 1 if not dry.