Vibration Damper - Installation

INSTALLATION





1. Install crankshaft damper using Special Tools C-4685-C1 (5.9 in.) Bolt (2), with Nut and Thrust Bearing from 6792, and 6792-1 (1) Installer.
2. Install vibration damper bolt. Torque bolt to 95 Nm (70 ft. lbs.).
3. Install the lower crossmemeber. Service and Repair
4. Install accessory drive belt Accessory Drive Belt - Installation.
5. Install the accessory drive belt splash shield and right front wheel.
6. Lower vehicle.
7. Install right engine mount. Engine Mount - Installation
8. Connect negative battery cable.