Power Steering Fluid Reservoir - Installation

INSTALLATION





1. Position reservoir (2) in place on engine mounting flange.
2. Install reservoir mounting screw (1). Tighten mounting screw to 28 Nm (21 ft. lbs.)
3. Install supply hose (3) onto reservoir (2). Slide hose clamp into position on fluid reservoir and attach it. Be sure hose clamp is installed past bead on fluid reservoir fitting.
4. Install return hose (4) onto reservoir (2). Slide hose clamp into position on fluid reservoir and attach it. Be sure hose clamp is installed past bead on fluid reservoir fitting.
5. Install engine appearance cover.
6. Install negative (-) battery cable on negative battery post.
7. Fill and bleed power steering system. Service and Repair
8. Inspect for leaks.