Removal

REMOVAL

NOTE: The following procedure may be used to remove shoes on either side of the vehicle.

1. Lock out automatic adjuster in parking brake lever. Service and Repair
2. Raise and support vehicle. Maintenance
3. Access and remove rear hub and bearing. Rear Hub / Bearing - Removal




4. Remove parking brake cable bolt (1) at knuckle.
5. Completely back off parking brake shoe adjustment.




6. Remove parking brake shoe adjuster spring (3).
7. Remove shoe adjuster (8).
8. Remove upper brake shoe hold-down clip and pin (7).
9. Remove lower brake shoe hold-down clip and pin (7).
10. Remove upper and lower shoes (6) with return spring (4) from shoe actuator.
11. Remove return spring (4) from shoes (6).