Spoiler - Installation

INSTALLATION





1. If replacing spoiler, transfer washer nozzle to new spoiler.
2. If replacing spoiler, transfer CHMSL lamp to new spoiler.
3. Place spoiler into position on outer liftgate panel.
4. Connect the washer hose.
5. Connect the CHMSL electrical connector.
6. Align the bolts through the holes and press spoiler into place, engaging the center fastener.
7. Install the four retaining nuts to spoiler.
8. Install the liftgate trim panel
9. connect the power liftgate prop rod.
10. Close the liftgate.
11. Connect the battery negative cable.
12. Verify vehicle and system operation.
13. Close hood.