Removal

REMOVAL





1. Remove rear header trim cover. Removal.
2. Remove liftgate sill scuff plate. Liftgate Sill Scuff Plate - Removal.
3. Remove bolt attaching second row seat belt lower anchor to quarter trim panel. Service and Repair
4. Remove upper trim panel from liftgate, if equipped with power liftgate. Liftgate Trim Panel - Removal.
5. Disconnect power liftgate link from ball head bracket, if equipped.




6. Remove the two screws attaching upper D-pillar.
7. Disengage locking tabs attaching trim to D-pillar.
8. Remove D-pillar trim panel from D-pillar.
9. Pass seat belt through slot in D-pillar trim panel.
10. Remove D-pillar trim from vehicle.




11. Remove attaching screw from D-pillar reinforcement molding and remove it.