Fuel Injector - Installation

INSTALLATION





1. Install the fuel injectors (4) to the fuel rail (2) by gently pushing the fuel injector into the fuel rail (2). Install the retaining clips.
2. Install the fuel rail (2) with the fuel injectors (4) by moving the fuel rail (2) side to side and pushing downward towards the intake manifold.
3. Install the fuel rail retaining bolts. Tighten to 9 Nm (80 in. lbs.).
4. Install the fuel injector harness (6) to the fuel injectors (4) then install the fuel injector electrical connector retaining clips (5).
5. Connect the fuel feed line (3). Tighten to 38 Nm (28 ft. lbs.).
6. Install the wiring harness cover (1), then install the wiring harness cover retaining screw.
7. Install the engine cover. Air Cleaner Housing - Installation.
8. Connect the negative battery cable.