Cylinder Head Cover - Installation

INSTALLATION

1. Check the gasket for tearing and breakage. If damage is evident, replace the gasket.




2. Position the cylinder head covers (2) on the cylinder head. Install the cylinder head cover bolts (1) and tighten to 10 Nm (7 ft. lbs.).




3. Route the engine vacuum hoses on the cylinder head cover retainiers (3).
4. Connect the crankcase ventilator hose to the left cylinder head cover, the ignition coils (2), and the spark plug wires (1).
5. Install the air cleaner housing. Air Cleaner Housing - Installation.