Front Fascia - Installation

INSTALLATION





1. Position the fascia on the vehicle and install the upper facia retaining bolts (1).




2. Position the front grille assembly and install the retaining bolts (1).
3. Raise and support the vehicle.
4. Install the left and right front fender to fascia retaining nuts and bolts. Installation.




5. Install the lower fascia retaining nuts (1).
6. Connect the ambient air temp sensor wire harness connector (2).




7. Connect the front marker lamp wire harness connector (1).




8. Connect the fog lamp wire harness connectors (1).




9. Install the left and right front fascia access panel retaining nuts and screws (1).




10. Install the lower splash shield and the retaining screws (1).