Rear Seat Center Retractor Side Belt Replacement

Rear Seat Center Retractor Side Belt Replacement

Removal Procedure





1. Remove the center seat belt retractor seat belt opening trim (1).





2. Remove the center seat belt retractor trim cover bolt (1).

3. Remove the center seat belt retractor trim cover (2).





4. Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt.

5. Remove the seat belt center retractor bolt.





6. Slide the center seat belt retractor up and out of the key hole slots on the seat back frame.





7. Partially remove the seat cushion cover (1) in order to gain access to the center seat belt retractor lower bolt (2).

8. Remove the center seat belt retractor lower bolt (2).

9. Remove the center seat belt retractor assembly from the vehicle.

Installation Procedure





1. Install the center seat belt lower belt (3) to the seat cushion frame.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the center seat belt retractor lower bolt (2) and tighten to 52 Nm (38 lb ft).

3. Install the seat cushion cover (1).





4. Slide the center seat belt retractor into key hole slots in the seat back frame.





5. Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt hole.

6. Install the center seat belt retractor bolt and tighten to 52 Nm (38 lb ft).





7. Install the center seat belt retractor trim cover (2).

8. Install the center seat belt retractor trim cover bolt (1) and tighten to 1.5 Nm (13 lb in).





9. Install the center seat belt retractor seat belt opening trim (1).