Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement

Removal Procedure





1. Remove the Fuel Injector Sight Shield. Refer to Fuel Injector Sight Shield Replacement Fuel Injector Sight Shield Replacement

2. Remove the oil level indicator from the oil level indicator tube.

3. Remove the oil level indicator tube bolt.

4. Remove the oil level indicator tube up through the exhaust manifold.

5. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.

Installation Procedure





1. Install a new seal on the oil level indicator tube.

2. Install the oil level indicator tube.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the oil level indicator tube bolt and tighten to 10 Nm (89 lb in).

4. Install the oil level indicator in the oil level indicator tube.

5. Install the Fuel Injector Sight Shield. Refer to Fuel Injector Sight Shield Replacement Fuel Injector Sight Shield Replacement