Parking Brake Actuator Replacement (With Dual Rear Wheel)

Parking Brake Actuator Replacement (With Dual Rear Wheel)

Removal Procedure

Warning:
Refer to Brake Dust Warning Brake Dust Warning.


1. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling Parking Brake Cable Adjuster Disabling

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.

4. Remove the parking brake shoes. Refer to Parking Brake Shoe Replacement (Single Rear Wheel - 1500 series) Parking Brake Shoe Replacement (Single Rear Wheel - 1500 series)Parking Brake Shoe Replacement (Dual Rear Wheel) Parking Brake Shoe Replacement (Dual Rear Wheel)Parking Brake Shoe Replacement (Single Rear Wheel - 2500/3500 Series) Parking Brake Shoe Replacement (Single Rear Wheel - 2500/3500 Series).

5. Disconnect the parking brake cable from the parking brake actuator lever.





6. Remove the parking brake actuator (1).

7. Remove the parking brake actuator boot (2).

Installation Procedure





1. Install the parking brake actuator (1) and boot (2).

2. Connect the park brake cable from the parking brake actuator lever.

3. Install the parking brake shoes. Refer to Parking Brake Shoe Replacement (Single Rear Wheel - 1500 series) Parking Brake Shoe Replacement (Single Rear Wheel - 1500 series)Parking Brake Shoe Replacement (Dual Rear Wheel) Parking Brake Shoe Replacement (Dual Rear Wheel)Parking Brake Shoe Replacement (Single Rear Wheel - 2500/3500 Series) Parking Brake Shoe Replacement (Single Rear Wheel - 2500/3500 Series).

4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.

5. Enable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Enabling Parking Brake Cable Adjuster Enabling