Diesel Emissions Fluid Lines/Hoses: Service and Repair

Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair)




2. Disconnect the urea pipe (1). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service)
3. Disconnect the electrical connector (2).




4. Release the plastic retainers (1).




5. Release the plastic retainers (1).




6. Release the plastic retainers (1).
7. Disconnect the urea pipe (1). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service)

Installation Procedure




1. Connect the urea pipe (1). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service)




2. Fasten the plastic retainers (1).




3. Fasten the plastic retainers (1).




4. Connect the electrical connector (2).
5. Connect the urea pipe (1). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service)