Charge Air Cooler Outlet Pipe Replacement

Charge Air Cooler Outlet Pipe Replacement

Removal Procedure




1. Remove the upper baffle deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Radiator Air Upper Baffle and Deflector Replacement)
2. Loosen the charge air cooler outlet pipe clamp (1) at the intake manifold (2).
3. Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement (Front Bumper Fascia Extension Replacement).
4. Disconnect the engine wiring harness electrical connector from the intake air pressure and temperature sensor.
5. Disconnect the vacuum hose from the outlet pipe.




6. Loosen the charge air cooler outlet pipe clamp (1) at the charge air cooler assembly (2).
7. Remove the right radiator support in order to reposition the radiator and allow the pipe to be removed. Refer to Radiator Support Replacement (LE8, LE9) (Radiator Support Replacement).
8. Remove the charge air cooler outlet pipe (3).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the charge air cooler outlet pipe (3) to the charge air cooler assembly (2).

Tighten the clamp to 5 Nm (44 lb in).

2. Install the right radiator support. Refer to Radiator Support Replacement (LE8, LE9) (Radiator Support Replacement).




3. Connect the vacuum hose to the outlet pipe.
4. Connect the engine wiring harness electrical connector to the intake air pressure and temperature sensor.
5. Install the charge air cooler outlet pipe to the intake manifold (2) and tighten the charge air cooler outlet pipe clamp (1).

Tighten the clamp to 5 Nm (44 lb in).

6. Install the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement (Front Bumper Fascia Extension Replacement).
7. Install the upper baffle deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Radiator Air Upper Baffle and Deflector Replacement).