Oil Line: Service and Repair

Turbocharger Oil Feed Pipe Replacement

Removal Procedure




1. Remove the turbocharger. Refer to Turbocharger Replacement (Turbocharger Replacement).
2. Remove the turbocharger oil feed pipe bolt.
3. Remove the oil feed pipe and washer.

Installation Procedure





Caution: Do not twist the turbocharger oil feed pipe. Twisting of the feed pipe will result in the collapse and deformation of the plastic pipe, restricting oil flow and causing turbocharger damage. During turbocharger replacement, gently push the oil feed pipe towards the front of the engine to clear the turbocharger. Assistance may be required to keep the pipes clear of the turbocharger during removal or installation.

Note: Lubricate the NEW washer with diesel fuel before installing.

1. Position the oil feed pipe and a NEW washer into place.
Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the oil feed pipe bolt and tighten to 34 Nm (25 lb ft).
3. Install the turbocharger. Refer to Turbocharger Replacement (Turbocharger Replacement).