Intake Air Duct: Service and Repair

Intake Air Valve Replacement

Removal Procedure




1. Remove the charge air cooler outlet pipe. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler Hoses/Pipes Replacement (Outlet) (Charged Air Cooler Hoses/Pipes Replacement (Outlet)).
2. Disconnect the engine wiring harness electrical connector (2) from the intake air valve.




3. Remove the intake air valve bolts and valve.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Position the intake air valve to the IAH and install the intake air valve bolts and tighten to 20 Nm (15 lb ft).




2. Connect the engine wiring harness electrical connector (2) to the intake air valve.
3. Install the charge air cooler outlet pipe. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler Hoses/Pipes Replacement (Outlet) (Charged Air Cooler Hoses/Pipes Replacement (Outlet)).