Shock Absorber Replacement

Shock Absorber Replacement (RWD)

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Support the lower control arm with a jack stand.




3. Remove the shock absorber nut and bushing.




4. Remove the shock absorber lower mounting bolts.
5. Remove the shock absorber from the vehicle.



Installation Procedure





1. Install the shock absorber to the vehicle.
2. Align the shock absorber with the mounting holes in the lower control arm.

Notice: Refer to Fastener Notice .

3. Install the shock absorber lower mounting bolts.

Tighten the bolts to 25 N.m (18 lb ft).





4. Install the shock absorber upper retaining nut and bushing.

Tighten the nut to 20 N.m (15 lb ft).

5. Remove the safety stands.
6. Lower the vehicle.
7. Dispose of the shock absorber. Refer to Shock Absorber Disposal (Shock Absorber Disposal) .