Ignition Coil: Service and Repair

IGNITION COIL(S) REPLACEMENT

REMOVAL PROCEDURE




1. Remove the spark plug wire from the ignition coil.




2. Disconnect the ignition coil electrical connector.




3. Remove the ignition coil bolts.




4. Remove the ignition coil.

INSTALLATION PROCEDURE




1. Install the ignition coil.




2. Install the ignition coil bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 8 N.m (71 lb in).




3. Connect the ignition coil electrical connector.




4. Install the spark plug wire to the ignition coil.